DigiDesign MachineControl Especificações descarregar pdf (Página 18)

MachineControl Guide14

Additional Commands and

Features

The following commands are available in all

MachineControl operating modes.

Redeﬁne Current Time Code Position

The Redefine Current Time Code Position com-

mand lets you redefine the session start time. By

creating an insertion point (or selection) and

then entering a new time code value for that lo-

cation, the session start time will be recalculated

based on the new, relative time code location.

For example, if you place an insertion point at

01:02:04:11, select Edit > Redefine Current Time

Code Position, and enter 01:00:08:00 to corre-

spond to the first frame of film, this adjusts the

session start time such that the insertion point

location is now 01:00:08:00.

To redeﬁne the current time code location:

1 Enable Link Edit/Timeline.

2 Locate Pro Tools to the beginning of the rele-

vant material (usually the first audio of a scene,

a 2 pop, or similar).

3 If appropriate, cue the external time code

source to the appropriate location (this will be

the location to which you want to align the cur-

rent Pro Tools insertion point). Note the time

code location, or copy it to the clipboard.

4 Choose Edit > Redeﬁne Current Time Code

Position.

5 Enter the new time code position.

6 Click OK.

Create Machine Track Arming Proﬁle

The Create Machine Track Arming Profile com-

mand lets you create and save machine descrip-

tions as Machine Profiles. Profiles are provided

for an ever-increasing list of common machines,

or you can customize profiles for specific situa-

tions and requirements. Options include the

ability to emulate a different machine type,

remap and rename audio tracks, and choose to

include or exclude the video and time code

tracks, when available. For more information,

see “Creating a Track Arming Profile” on

page 30.

Redeﬁning the current time code position

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Comentários a estes Manuais

Sem comentários

DigiDesign MachineControl Especificações Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Software DigiDesign MachineControl